CONINS ACRYLCOAT AR-60 is a range of high quality, flexible, transparent, and eco-friendly acrylic conformal coating for PCBA which are inevitable and delicate components in electronics and electrical. PCBA can be damaged in harsh environmental conditions and results in failure of electronics to function. Conins Acrylcoat AR-60 provides the right protection for the PCBAs.
| TECHNICAL DATA | AR-60 |
| Appearance (Liquid & Coated Dry Film) | Clear, Transparent |
| Specific Gravity (Density @24°C ) | 0.951 |
| Viscosity @24 Deg (Zhan #2) | 45 ± 1 Sec |
| Flash Point | < 79°C |
| Solid Content (w/w%) | 45 |
| CTI Value | 600 |
| Coating Thickness | 40 - 45 Micron |
| Dielectric Strength | 15 KV/MM |
| Thermal Cycling | AS PER MIL Std. |
| Moisture Resistance | 1.5 × 1012 Ohms |
| Insulation Resistance | 3.5 × 1012 Ohms |
| Fungus Resistance | AS PER MIL Std. |
| Withstand Temperature (Film) | -40° To +140° (Deg C) |
| Coverage Area (40 micron Film) | 1.5m² |
| Film Traceable | Under UV Lamp |
| Drying Time (Touch to Dry) | 10 -15 Min. |
| Hard Dry | 2 Hours or More. |
| Pre and Post Heating (for Touch to Dry) | 4-5 Min. |
| PCB Coating @50 Deg C Hard Dry | 10 Min. |
| Curing Time | 24 Hours |
| Optimum Properties | 7 Days |
| Water Vapour Dans, Rate ASTM-E-96g/h-m2 | 0-310 |
| Shore Hardness ISO-868-durometer | 58 |
| Elongation ISO-527-3 N/mm2Cpsi | 5-9 (847) |
| Tensile Modules ISO-527-3 N/mm2Cpsi | 575 (82000) |
| Volume Resistivity IEC-60093 Ω | 7.00 × 1015 |
| Surface Resistivity IEC-60093 Ω | 1.63 × 1017 |
| Flame Test As per UL94-V-1 | Pass |
| Packing | 500 ml Aerosol |
| Shelf life @ room temperature | 12 Months |
Leave a Review !
View Catalogue