View Catalogue
Conformal Coating for Bengaluru's Electronics Manufacturers
Bengaluru (Bangalore) is India's leading electronics design and manufacturing centre. EMS companies, aerospace and defence electronics makers, telecom and medical device manufacturers operate in Electronic City, Peenya, Bommasandra, Jigani, Whitefield and the Narasapura and Doddaballapur industrial areas.
CONINS PUNE supplies C-DOT approved Acrylcoat PCB conformal coatings, PCB cleaners and spray pumps to manufacturers in Bengaluru. Acrylcoat conforms to MIL-I-46058C Type AR, which suits the city's defence and aerospace electronics sector.
- C-DOT Approved
- MIL-I-46058C Type AR
- RoHS Compliant
- ISO 9001:2015 & ISO 14001:2015
- 25+ Years of Experience
- Supplied to
- Bengaluru, Karnataka
- Made at
- Our own plant in Pune, Maharashtra, India
- Delivery
- Road transport & courier
- Packing
- 500 ml aerosol · 1, 5 & 25 litre containers
- Documents
- MSDS & technical data sheets on request
Why PCBs in Bengaluru Need Conformal Coating
Bengaluru's mild climate still brings a humid monsoon, and boards built here are shipped to coastal, hot and dusty locations across India and abroad. Defence, aerospace and telecom equipment must also pass humidity, thermal cycling and fungus tests. Conformal coating helps PCB assemblies meet these requirements.
What Acrylcoat protects against
- Moisture, humidity and condensation
- Oxidation and corrosion of component leads
- Fungus growth in humid conditions
- Dust and contamination between conductors
- High-voltage arcing and corona shorts
Recommended Conformal Coatings for Bengaluru
Based on the industries and conditions in Bengaluru, these are the grades customers most often choose. Our technical team will confirm the right grade for your board and process.
Acrylcoat AR-30
Why for Bengaluru: C-DOT approved, MIL-I-46058C Type AR.
Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR.
View product details →
Opaque Black Coating
Why for Bengaluru: Opaque coating to protect circuit designs.
Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved.
View product details →
G1 / G2 / G3 Compliance Coating
Why for Bengaluru: G1, G2 and G3 coatings for harsh environments.
Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants.
View product details →Complete Product Range Available in Bengaluru
| Product | Key features | Packing |
|---|---|---|
| PCB Conformal Coating (Acrylcoat AR-30) | Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat AR-60) | Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable. | 500 ml aerosol |
| PCB Conformal Coating (Acrylcoat ALQ-30) | Fast-drying acrylic lacquer for spray, brush or dip coating of PCB assemblies; solderable for easy rework. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-60) | High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-100) | Our thickest ALQ grade for boards exposed to high humidity, moisture and fungus over long service life. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| Coating For LED Lighting (Acrylcoat LED-LGT-SPL-60) | Clear coating for LED drivers and LED boards; light intensity remains the same after coating. | 1, 5 and 25 litre |
| Coating For Automobile Electronics (Acrylcoat SKR-70) | Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes. | 1 litre, 5 litre and 25 litre |
| Conformal Coating For G1, G2 & G3 Compliances | Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants. | Contact us for pack sizes |
| Opaque (Black) Conformal Coating | Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved. | Contact us for pack sizes |
| PCB Conformal Coating (Acrylcoat ARB-30 Black) | Black aerosol acrylic, 18-20 µm film, -40°C to +140°C, RoHS compliant; conceals components on the PCBA surface. | 500 ml aerosol |
| Water Base Conformal Coating (Aquacoat CONW-54) | VOC-free, water-based moisture-proof coating; no corrosion observed after 72 hours of ASTM B117 salt spray testing. | Contact us for pack sizes |
| Coating For Electronic / Electrical Parts (ELCOAT EL-30) | Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable. | 500 ml aerosol; 1 and 25 litre |
| PCB Cleaners (Elclean Liquid) | Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue. | Contact us for pack sizes |
| PCB Cleaners (ELCLEAN E-Clean) | Fast-drying universal PCB cleaner and degreaser, free of CFC and HFC. | 500 ml aerosol; 1, 5 and 25 litre |
| External Dispensing Spray Pump | 5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100. | Equipment |
Industries We Serve in Bengaluru
EMS & PCB Assembly
Contract manufacturers in Electronic City, Bommasandra and Narasapura.
Aerospace & Defence
Avionics, radar and defence electronics where MIL-I-46058C Type AR coatings are specified.
Telecom & Networking
Telecom equipment for which C-DOT approval is relevant.
Medical Devices
Diagnostic and patient-monitoring electronics.
EV & Automotive Electronics
Chargers, BMS and controllers for EV start-ups and auto suppliers.
How to Apply Acrylcoat Conformal Coating
- Clean the boardRemove flux, oil and dust with Elclean Liquid or ELCLEAN E-Clean.
- Pre-heatWarm the PCB to about 45–50°C in an oven or with a hot-air blower to drive off moisture.
- ApplySpray evenly from about 25 cm, or brush or dip. For volume work use our spray pump.
- Dry & cureAR grades are touch dry in about 10–15 minutes; ALQ-60, ALQ-100 and SKR-70 are oven cured at 80°C.
- InspectCheck coverage under a UV lamp on grades with a UV tracer before testing.
Exact drying and curing times depend on the grade and film thickness. See each product page or the technical data sheet for details.
Standards & Certifications
- Acrylcoat approved by C-DOT
- Conforms to MIL Standard MIL-I-46058C Type AR
- Complies with the European Union RoHS Directive
- Products have passed toxicity tests
- ISO 9001:2015 and ISO 14001:2015 certified
- In-house R&D and quality control laboratory
Delivery to Bengaluru
Orders for Bengaluru are dispatched from our Pune works by road transport or courier. Samples and urgent orders can be sent by air courier.
With over 25 years of experience in conformal coatings, we make every batch at our own plant and test it before dispatch, so customers in Bengaluru get consistent quality on every order.
Industrial Areas We Supply in and Around Bengaluru
PCB Conformal Coating in Bengaluru: FAQs
Who supplies PCB conformal coating in Bengaluru?
CONINS PUNE manufactures Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps in Pune, India, and supplies them to customers in Bengaluru. Acrylcoat is approved by C-DOT, conforms to MIL-I-46058C Type AR and complies with the EU RoHS Directive.
What is PCB conformal coating and why is it needed?
A conformal coating is a thin protective film applied over a printed circuit board assembly. It follows the shape of the board and components and protects them against moisture, dust, fungus, oxidation and corrosion, and against high-voltage arcing and corona shorts. This reduces field failures and extends product life.
Is your coating approved for telecom and defence use?
Acrylcoat is approved by C-DOT and conforms to MIL-I-46058C Type AR. Technical data sheets and MSDS are available for your qualification process.
Do you supply to Electronic City and Peenya?
Yes. We supply manufacturers across Bengaluru, including Electronic City, Peenya, Bommasandra, Jigani and Whitefield, as well as Hosur.
What packing sizes are available?
Acrylcoat AR-30, ALQ-30, ALQ-60 and ALQ-100 are available in 500 ml aerosol cans and in 1, 5 and 25 litre lacquer containers. AR-60 and ARB-30 Black come in 500 ml aerosols, and SKR-70 in 1, 5 and 25 litre packs. MSDS and technical data sheets are provided on request.
How do I get a quotation for conformal coating in Bengaluru?
Send your product requirement, board type, coating method and quantity through our enquiry form, call +91 95455 91323, or message us on WhatsApp. We will reply with a technical recommendation and quotation for delivery to Bengaluru.
Need PCB Conformal Coating in Bengaluru?
Share your board type, coating method and quantity. Our team will recommend the right Acrylcoat grade and send a quotation for delivery to Bengaluru.
Leave a Review !