View Catalogue
Conformal Coating for Italy's Electronics Manufacturers
Italy's electronics industry is concentrated in the north: industrial automation and drives in Lombardy around Milan, packaging machinery and automotive in Emilia-Romagna, automotive electronics around Turin in Piedmont, and home appliance and HVAC controls in Veneto and Lombardy.
CONINS PUNE supplies Acrylcoat PCB conformal coatings, PCB cleaners and dispensing equipment to Italian manufacturers. Acrylcoat complies with the EU RoHS Directive, and our ISO 9001:2015 and ISO 14001:2015 certified plant in Pune, India makes every batch in-house.
- C-DOT Approved
- MIL-I-46058C Type AR
- RoHS Compliant
- ISO 9001:2015 & ISO 14001:2015
- 25+ Years of Experience
- Supplied to
- Italy
- Made at
- Our own plant in Pune, Maharashtra, India
- Delivery
- Export by air & sea freight
- Packing
- 500 ml aerosol · 1, 5 & 25 litre containers
- Documents
- MSDS & technical data sheets on request
Why PCBs in Italy Need Conformal Coating
Appliance and HVAC controls in Italy work close to water, steam and heat, while industrial and outdoor electronics face humid winters in the Po Valley and salty air on the coast. Moisture and contamination on a bare PCB cause tracking, corrosion and intermittent faults. A conformal coating seals the board surface and extends its service life.
What Acrylcoat protects against
- Moisture, humidity and condensation
- Oxidation and corrosion of component leads
- Fungus growth in humid conditions
- Dust and contamination between conductors
- High-voltage arcing and corona shorts
Recommended Conformal Coatings for Italy
Based on the industries and conditions in Italy, these are the grades customers most often choose. Our technical team will confirm the right grade for your board and process.
Acrylcoat ALQ-60
Why for Italy: High-build film for appliance controls near water and steam.
High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film.
View product details →
Acrylcoat LED-LGT-SPL-60
Why for Italy: Light output stays the same after coating.
Clear coating for LED drivers and LED boards; light intensity remains the same after coating.
View product details →
ELCOAT EL-30
Why for Italy: 60 kV/mm non-acrylic coating for electrical parts.
Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable.
View product details →Complete Product Range Available in Italy
| Product | Key features | Packing |
|---|---|---|
| PCB Conformal Coating (Acrylcoat AR-30) | Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat AR-60) | Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable. | 500 ml aerosol |
| PCB Conformal Coating (Acrylcoat ALQ-30) | Fast-drying acrylic lacquer for spray, brush or dip coating of PCB assemblies; solderable for easy rework. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-60) | High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-100) | Our thickest ALQ grade for boards exposed to high humidity, moisture and fungus over long service life. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| Coating For LED Lighting (Acrylcoat LED-LGT-SPL-60) | Clear coating for LED drivers and LED boards; light intensity remains the same after coating. | 1, 5 and 25 litre |
| Coating For Automobile Electronics (Acrylcoat SKR-70) | Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes. | 1 litre, 5 litre and 25 litre |
| Conformal Coating For G1, G2 & G3 Compliances | Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants. | Contact us for pack sizes |
| Opaque (Black) Conformal Coating | Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved. | Contact us for pack sizes |
| PCB Conformal Coating (Acrylcoat ARB-30 Black) | Black aerosol acrylic, 18-20 µm film, -40°C to +140°C, RoHS compliant; conceals components on the PCBA surface. | 500 ml aerosol |
| Water Base Conformal Coating (Aquacoat CONW-54) | VOC-free, water-based moisture-proof coating; no corrosion observed after 72 hours of ASTM B117 salt spray testing. | Contact us for pack sizes |
| Coating For Electronic / Electrical Parts (ELCOAT EL-30) | Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable. | 500 ml aerosol; 1 and 25 litre |
| PCB Cleaners (Elclean Liquid) | Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue. | Contact us for pack sizes |
| PCB Cleaners (ELCLEAN E-Clean) | Fast-drying universal PCB cleaner and degreaser, free of CFC and HFC. | 500 ml aerosol; 1, 5 and 25 litre |
| External Dispensing Spray Pump | 5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100. | Equipment |
Industries We Serve in Italy
Home Appliances & HVAC
Controller boards for washing machines, dishwashers, boilers and heat pumps.
Industrial Automation & Packaging Machinery
Drives, sensors and control boards for machine builders in Lombardy and Emilia-Romagna.
Automotive & Motorcycle Electronics
Control and lighting electronics for vehicle and motorcycle manufacturers.
LED Lighting
Architectural and street lighting drivers that need clear, non-yellowing protection.
Energy & Power Electronics
Inverters, chargers and power supplies for solar and storage systems.
How to Apply Acrylcoat Conformal Coating
- Clean the boardRemove flux, oil and dust with Elclean Liquid or ELCLEAN E-Clean.
- Pre-heatWarm the PCB to about 45–50°C in an oven or with a hot-air blower to drive off moisture.
- ApplySpray evenly from about 25 cm, or brush or dip. For volume work use our spray pump.
- Dry & cureAR grades are touch dry in about 10–15 minutes; ALQ-60, ALQ-100 and SKR-70 are oven cured at 80°C.
- InspectCheck coverage under a UV lamp on grades with a UV tracer before testing.
Exact drying and curing times depend on the grade and film thickness. See each product page or the technical data sheet for details.
Standards & Certifications
- Acrylcoat approved by C-DOT
- Conforms to MIL Standard MIL-I-46058C Type AR
- Complies with the European Union RoHS Directive
- Products have passed toxicity tests
- ISO 9001:2015 and ISO 14001:2015 certified
- In-house R&D and quality control laboratory
Shipping to Italy
We ship to Italy by air freight to Milan, or by sea freight from Nhava Sheva (JNPT) to Genoa or La Spezia. Flammable coatings and aerosols are packed and documented as dangerous goods with MSDS.
With over 25 years of experience in conformal coatings, we make every batch at our own plant and test it before dispatch, so customers in Italy get consistent quality on every order.
Regions & Cities We Supply in Italy
PCB Conformal Coating in Italy: FAQs
Who supplies PCB conformal coating in Italy?
CONINS PUNE manufactures Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps in Pune, India, and supplies them to customers in Italy. Acrylcoat is approved by C-DOT, conforms to MIL-I-46058C Type AR and complies with the EU RoHS Directive.
What is PCB conformal coating and why is it needed?
A conformal coating is a thin protective film applied over a printed circuit board assembly. It follows the shape of the board and components and protects them against moisture, dust, fungus, oxidation and corrosion, and against high-voltage arcing and corona shorts. This reduces field failures and extends product life.
Which conformal coating do you recommend for appliance controller boards?
For boards near water or steam we usually recommend Acrylcoat ALQ-60, which builds a thicker film and is oven cured at 80°C. For lighter duty, ALQ-30 or AR-30 is enough.
Is Acrylcoat RoHS compliant?
Yes. Acrylcoat complies with the European Union RoHS Directive and our products have passed toxicity tests.
What packing sizes are available?
Acrylcoat AR-30, ALQ-30, ALQ-60 and ALQ-100 are available in 500 ml aerosol cans and in 1, 5 and 25 litre lacquer containers. AR-60 and ARB-30 Black come in 500 ml aerosols, and SKR-70 in 1, 5 and 25 litre packs. MSDS and technical data sheets are provided on request.
How do I get a quotation for conformal coating in Italy?
Send your product requirement, board type, coating method and quantity through our enquiry form, call +91 95455 91323, or message us on WhatsApp. We will reply with a technical recommendation and quotation for delivery to Italy.
Need PCB Conformal Coating in Italy?
Share your board type, coating method and quantity. Our team will recommend the right Acrylcoat grade and send a quotation for delivery to Italy.
Leave a Review !