View Catalogue
Conformal Coating for the UAE's Electronics Manufacturers
The United Arab Emirates is a hub for electronics assembly, repair, distribution and project supply. Manufacturers and service companies in Dubai (Jebel Ali Free Zone, Dubai Silicon Oasis, Dubai Investments Park), Sharjah and Ajman industrial areas, and Abu Dhabi (KIZAD, Mussafah) build and service controls for HVAC, LED lighting, security, solar and industrial equipment.
CONINS PUNE supplies Acrylcoat PCB conformal coatings, Elclean PCB cleaners and dispensing spray pumps to companies in the UAE. India and the UAE are close trading partners, so shipments reach Dubai quickly from our plant in Pune.
- C-DOT Approved
- MIL-I-46058C Type AR
- RoHS Compliant
- ISO 9001:2015 & ISO 14001:2015
- 25+ Years of Experience
- Supplied to
- United Arab Emirates
- Made at
- Our own plant in Pune, Maharashtra, India
- Delivery
- Export by air & sea freight
- Packing
- 500 ml aerosol · 1, 5 & 25 litre containers
- Documents
- MSDS & technical data sheets on request
Why PCBs in the UAE Need Conformal Coating
Electronics in the UAE face extreme summer heat, high coastal humidity, condensation from air conditioning, and fine sand and dust. Dust that absorbs moisture creates conductive paths across a PCB, and salty coastal air corrodes solder joints. A conformal coating rated for high temperatures, such as Acrylcoat AR-60 (up to +140°C), seals the board against moisture, dust and salt.
What Acrylcoat protects against
- Moisture, humidity and condensation
- Oxidation and corrosion of component leads
- Fungus growth in humid conditions
- Dust and contamination between conductors
- High-voltage arcing and corona shorts
Recommended Conformal Coatings for the UAE
Based on the industries and conditions in the UAE, these are the grades customers most often choose. Our technical team will confirm the right grade for your board and process.
Acrylcoat AR-60
Why for UAE: Film rated up to +140°C for hot conditions.
Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable.
View product details →
Acrylcoat LED-LGT-SPL-60
Why for UAE: Clear coating for LED drivers and street lighting.
Clear coating for LED drivers and LED boards; light intensity remains the same after coating.
View product details →
G1 / G2 / G3 Compliance Coating
Why for UAE: G1, G2 and G3 coatings for dusty, corrosive environments.
Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants.
View product details →Complete Product Range Available in the UAE
| Product | Key features | Packing |
|---|---|---|
| PCB Conformal Coating (Acrylcoat AR-30) | Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat AR-60) | Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable. | 500 ml aerosol |
| PCB Conformal Coating (Acrylcoat ALQ-30) | Fast-drying acrylic lacquer for spray, brush or dip coating of PCB assemblies; solderable for easy rework. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-60) | High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-100) | Our thickest ALQ grade for boards exposed to high humidity, moisture and fungus over long service life. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| Coating For LED Lighting (Acrylcoat LED-LGT-SPL-60) | Clear coating for LED drivers and LED boards; light intensity remains the same after coating. | 1, 5 and 25 litre |
| Coating For Automobile Electronics (Acrylcoat SKR-70) | Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes. | 1 litre, 5 litre and 25 litre |
| Conformal Coating For G1, G2 & G3 Compliances | Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants. | Contact us for pack sizes |
| Opaque (Black) Conformal Coating | Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved. | Contact us for pack sizes |
| PCB Conformal Coating (Acrylcoat ARB-30 Black) | Black aerosol acrylic, 18-20 µm film, -40°C to +140°C, RoHS compliant; conceals components on the PCBA surface. | 500 ml aerosol |
| Water Base Conformal Coating (Aquacoat CONW-54) | VOC-free, water-based moisture-proof coating; no corrosion observed after 72 hours of ASTM B117 salt spray testing. | Contact us for pack sizes |
| Coating For Electronic / Electrical Parts (ELCOAT EL-30) | Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable. | 500 ml aerosol; 1 and 25 litre |
| PCB Cleaners (Elclean Liquid) | Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue. | Contact us for pack sizes |
| PCB Cleaners (ELCLEAN E-Clean) | Fast-drying universal PCB cleaner and degreaser, free of CFC and HFC. | 500 ml aerosol; 1, 5 and 25 litre |
| External Dispensing Spray Pump | 5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100. | Equipment |
Industries We Serve in the UAE
HVAC & Building Controls
Controllers for chillers, AC units and building management systems in hot, humid conditions.
LED & Street Lighting
LED drivers for outdoor, road and architectural lighting projects.
Solar & Power Electronics
Solar inverters, charge controllers and UPS systems.
Security & ELV Systems
CCTV, access control and fire alarm electronics installed in buildings and outdoors.
Electronics Repair & Refurbishment
Service centres that re-coat boards after repair using aerosols and PCB cleaners.
How to Apply Acrylcoat Conformal Coating
- Clean the boardRemove flux, oil and dust with Elclean Liquid or ELCLEAN E-Clean.
- Pre-heatWarm the PCB to about 45–50°C in an oven or with a hot-air blower to drive off moisture.
- ApplySpray evenly from about 25 cm, or brush or dip. For volume work use our spray pump.
- Dry & cureAR grades are touch dry in about 10–15 minutes; ALQ-60, ALQ-100 and SKR-70 are oven cured at 80°C.
- InspectCheck coverage under a UV lamp on grades with a UV tracer before testing.
Exact drying and curing times depend on the grade and film thickness. See each product page or the technical data sheet for details.
Standards & Certifications
- Acrylcoat approved by C-DOT
- Conforms to MIL Standard MIL-I-46058C Type AR
- Complies with the European Union RoHS Directive
- Products have passed toxicity tests
- ISO 9001:2015 and ISO 14001:2015 certified
- In-house R&D and quality control laboratory
Shipping to the UAE
Shipments to the UAE go by air freight to Dubai or Abu Dhabi, or by sea freight from Nhava Sheva (JNPT) to Jebel Ali, one of the shortest sea routes from India. Coatings and aerosols are packed and documented as dangerous goods, with MSDS.
With over 25 years of experience in conformal coatings, we make every batch at our own plant and test it before dispatch, so customers in the UAE get consistent quality on every order.
Regions & Cities We Supply in the UAE
PCB Conformal Coating in the UAE: FAQs
Who supplies PCB conformal coating in the UAE?
CONINS PUNE manufactures Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps in Pune, India, and supplies them to customers in the UAE. Acrylcoat is approved by C-DOT, conforms to MIL-I-46058C Type AR and complies with the EU RoHS Directive.
What is PCB conformal coating and why is it needed?
A conformal coating is a thin protective film applied over a printed circuit board assembly. It follows the shape of the board and components and protects them against moisture, dust, fungus, oxidation and corrosion, and against high-voltage arcing and corona shorts. This reduces field failures and extends product life.
Do you supply conformal coating in Dubai?
Yes. We ship Acrylcoat coatings, PCB cleaners and spray pumps from Pune, India to Dubai, Sharjah, Ajman and Abu Dhabi by air or sea freight.
Which coating handles UAE heat and dust?
Acrylcoat AR-60 is rated from -40°C to +140°C. For electronics exposed to dust and corrosive gases, our G1, G2 and G3 compliance coatings give a higher level of protection.
What packing sizes are available?
Acrylcoat AR-30, ALQ-30, ALQ-60 and ALQ-100 are available in 500 ml aerosol cans and in 1, 5 and 25 litre lacquer containers. AR-60 and ARB-30 Black come in 500 ml aerosols, and SKR-70 in 1, 5 and 25 litre packs. MSDS and technical data sheets are provided on request.
How do I get a quotation for conformal coating in the UAE?
Send your product requirement, board type, coating method and quantity through our enquiry form, call +91 95455 91323, or message us on WhatsApp. We will reply with a technical recommendation and quotation for delivery to the UAE.
Need PCB Conformal Coating in the UAE?
Share your board type, coating method and quantity. Our team will recommend the right Acrylcoat grade and send a quotation for delivery to the UAE.
Leave a Review !