View Catalogue
Conformal Coating for Australia's Electronics Manufacturers
Australia's electronics manufacturers focus on high-value, rugged products: mining and resources electronics in Western Australia and Queensland, defence electronics in South Australia, and industrial, medical, solar and communications equipment in Melbourne, Sydney and Brisbane.
CONINS PUNE supplies Acrylcoat PCB conformal coatings, PCB cleaners and spray equipment to Australian companies. Acrylcoat conforms to MIL-I-46058C Type AR, and our coatings are made at our ISO 9001:2015 and ISO 14001:2015 certified plant in Pune, India.
- C-DOT Approved
- MIL-I-46058C Type AR
- RoHS Compliant
- ISO 9001:2015 & ISO 14001:2015
- 25+ Years of Experience
- Supplied to
- Australia
- Made at
- Our own plant in Pune, Maharashtra, India
- Delivery
- Export by air & sea freight
- Packing
- 500 ml aerosol · 1, 5 & 25 litre containers
- Documents
- MSDS & technical data sheets on request
Why PCBs in Australia Need Conformal Coating
Australian electronics may work in tropical humidity in the north, salty coastal air, or hot, dusty mine sites in the outback. Large daily temperature swings cause condensation inside enclosures. Conformal coating seals PCB assemblies against moisture, dust and salt and protects component leads from corrosion.
What Acrylcoat protects against
- Moisture, humidity and condensation
- Oxidation and corrosion of component leads
- Fungus growth in humid conditions
- Dust and contamination between conductors
- High-voltage arcing and corona shorts
Recommended Conformal Coatings for Australia
Based on the industries and conditions in Australia, these are the grades customers most often choose. Our technical team will confirm the right grade for your board and process.
Acrylcoat AR-30
Why for Australia: MIL-I-46058C Type AR acrylic with UV tracer.
Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR.
View product details →
G1 / G2 / G3 Compliance Coating
Why for Australia: Coatings for dusty and corrosive G2/G3 sites.
Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants.
View product details →
Acrylcoat AR-60
Why for Australia: Film rated from -40°C to +140°C.
Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable.
View product details →Complete Product Range Available in Australia
| Product | Key features | Packing |
|---|---|---|
| PCB Conformal Coating (Acrylcoat AR-30) | Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat AR-60) | Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable. | 500 ml aerosol |
| PCB Conformal Coating (Acrylcoat ALQ-30) | Fast-drying acrylic lacquer for spray, brush or dip coating of PCB assemblies; solderable for easy rework. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-60) | High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-100) | Our thickest ALQ grade for boards exposed to high humidity, moisture and fungus over long service life. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| Coating For LED Lighting (Acrylcoat LED-LGT-SPL-60) | Clear coating for LED drivers and LED boards; light intensity remains the same after coating. | 1, 5 and 25 litre |
| Coating For Automobile Electronics (Acrylcoat SKR-70) | Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes. | 1 litre, 5 litre and 25 litre |
| Conformal Coating For G1, G2 & G3 Compliances | Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants. | Contact us for pack sizes |
| Opaque (Black) Conformal Coating | Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved. | Contact us for pack sizes |
| PCB Conformal Coating (Acrylcoat ARB-30 Black) | Black aerosol acrylic, 18-20 µm film, -40°C to +140°C, RoHS compliant; conceals components on the PCBA surface. | 500 ml aerosol |
| Water Base Conformal Coating (Aquacoat CONW-54) | VOC-free, water-based moisture-proof coating; no corrosion observed after 72 hours of ASTM B117 salt spray testing. | Contact us for pack sizes |
| Coating For Electronic / Electrical Parts (ELCOAT EL-30) | Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable. | 500 ml aerosol; 1 and 25 litre |
| PCB Cleaners (Elclean Liquid) | Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue. | Contact us for pack sizes |
| PCB Cleaners (ELCLEAN E-Clean) | Fast-drying universal PCB cleaner and degreaser, free of CFC and HFC. | 500 ml aerosol; 1, 5 and 25 litre |
| External Dispensing Spray Pump | 5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100. | Equipment |
Industries We Serve in Australia
Mining & Resources
Control, monitoring and communication electronics on mine sites.
Defence & Aerospace
Electronics where MIL-I-46058C Type AR coatings are specified.
Solar & Battery Storage
Inverters, controllers and battery systems for rooftop and utility solar.
Agriculture & Irrigation
Controllers and sensors used outdoors on farms.
Marine & Coastal Electronics
Electronics exposed to salt spray along the coast.
How to Apply Acrylcoat Conformal Coating
- Clean the boardRemove flux, oil and dust with Elclean Liquid or ELCLEAN E-Clean.
- Pre-heatWarm the PCB to about 45–50°C in an oven or with a hot-air blower to drive off moisture.
- ApplySpray evenly from about 25 cm, or brush or dip. For volume work use our spray pump.
- Dry & cureAR grades are touch dry in about 10–15 minutes; ALQ-60, ALQ-100 and SKR-70 are oven cured at 80°C.
- InspectCheck coverage under a UV lamp on grades with a UV tracer before testing.
Exact drying and curing times depend on the grade and film thickness. See each product page or the technical data sheet for details.
Standards & Certifications
- Acrylcoat approved by C-DOT
- Conforms to MIL Standard MIL-I-46058C Type AR
- Complies with the European Union RoHS Directive
- Products have passed toxicity tests
- ISO 9001:2015 and ISO 14001:2015 certified
- In-house R&D and quality control laboratory
Shipping to Australia
Orders for Australia ship by air freight to Sydney, Melbourne or Perth, or by sea freight from Nhava Sheva (JNPT) to Melbourne, Sydney or Fremantle. Coatings and aerosols are packed and documented as dangerous goods, with MSDS.
With over 25 years of experience in conformal coatings, we make every batch at our own plant and test it before dispatch, so customers in Australia get consistent quality on every order.
Regions & Cities We Supply in Australia
PCB Conformal Coating in Australia: FAQs
Who supplies PCB conformal coating in Australia?
CONINS PUNE manufactures Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps in Pune, India, and supplies them to customers in Australia. Acrylcoat is approved by C-DOT, conforms to MIL-I-46058C Type AR and complies with the EU RoHS Directive.
What is PCB conformal coating and why is it needed?
A conformal coating is a thin protective film applied over a printed circuit board assembly. It follows the shape of the board and components and protects them against moisture, dust, fungus, oxidation and corrosion, and against high-voltage arcing and corona shorts. This reduces field failures and extends product life.
Do you supply conformal coating for mining electronics in Australia?
Yes. For dusty, humid or corrosive mine sites we recommend our G2 or G3 compliance coatings, or a thicker Acrylcoat grade. Our engineers will advise after reviewing your application.
How do I order from Australia?
Send your product, quantity and delivery city through our enquiry form. We will send a quotation with shipping options.
What packing sizes are available?
Acrylcoat AR-30, ALQ-30, ALQ-60 and ALQ-100 are available in 500 ml aerosol cans and in 1, 5 and 25 litre lacquer containers. AR-60 and ARB-30 Black come in 500 ml aerosols, and SKR-70 in 1, 5 and 25 litre packs. MSDS and technical data sheets are provided on request.
How do I get a quotation for conformal coating in Australia?
Send your product requirement, board type, coating method and quantity through our enquiry form, call +91 95455 91323, or message us on WhatsApp. We will reply with a technical recommendation and quotation for delivery to Australia.
Need PCB Conformal Coating in Australia?
Share your board type, coating method and quantity. Our team will recommend the right Acrylcoat grade and send a quotation for delivery to Australia.
Leave a Review !