View Catalogue
Conformal Coating for Mexico's Electronics Manufacturers
Mexico is a major electronics and automotive manufacturing base serving North America. EMS plants in Guadalajara (Jalisco), Tijuana (Baja California), Ciudad Juárez (Chihuahua) and Monterrey (Nuevo León), and automotive suppliers across the Bajío region in Querétaro, Guanajuato and Aguascalientes, assemble large volumes of circuit boards.
CONINS PUNE supplies Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps to manufacturers in Mexico, from our own plant in Pune, India.
- C-DOT Approved
- MIL-I-46058C Type AR
- RoHS Compliant
- ISO 9001:2015 & ISO 14001:2015
- 25+ Years of Experience
- Supplied to
- Mexico
- Made at
- Our own plant in Pune, Maharashtra, India
- Delivery
- Export by air & sea freight
- Packing
- 500 ml aerosol · 1, 5 & 25 litre containers
- Documents
- MSDS & technical data sheets on request
Why PCBs in Mexico Need Conformal Coating
Many Mexican plants build electronics for vehicles and appliances that will face heat, humidity and condensation in service. Coastal and southern regions are hot and humid, while northern border cities see large temperature swings. Conformal coating keeps moisture and dust off the PCB, preventing corrosion and short circuits.
What Acrylcoat protects against
- Moisture, humidity and condensation
- Oxidation and corrosion of component leads
- Fungus growth in humid conditions
- Dust and contamination between conductors
- High-voltage arcing and corona shorts
Recommended Conformal Coatings for Mexico
Based on the industries and conditions in Mexico, these are the grades customers most often choose. Our technical team will confirm the right grade for your board and process.
Acrylcoat SKR-70
Why for Mexico: Thick-film coating for automotive electronics.
Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes.
View product details →
External Dispensing Spray Pump
Why for Mexico: Spray pump for coating PCB assemblies in bulk.
5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100.
View product details →
Elclean Liquid
Why for Mexico: Liquid PCB cleaner for pre-coating cleaning.
Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue.
View product details →Complete Product Range Available in Mexico
| Product | Key features | Packing |
|---|---|---|
| PCB Conformal Coating (Acrylcoat AR-30) | Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat AR-60) | Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable. | 500 ml aerosol |
| PCB Conformal Coating (Acrylcoat ALQ-30) | Fast-drying acrylic lacquer for spray, brush or dip coating of PCB assemblies; solderable for easy rework. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-60) | High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-100) | Our thickest ALQ grade for boards exposed to high humidity, moisture and fungus over long service life. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| Coating For LED Lighting (Acrylcoat LED-LGT-SPL-60) | Clear coating for LED drivers and LED boards; light intensity remains the same after coating. | 1, 5 and 25 litre |
| Coating For Automobile Electronics (Acrylcoat SKR-70) | Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes. | 1 litre, 5 litre and 25 litre |
| Conformal Coating For G1, G2 & G3 Compliances | Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants. | Contact us for pack sizes |
| Opaque (Black) Conformal Coating | Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved. | Contact us for pack sizes |
| PCB Conformal Coating (Acrylcoat ARB-30 Black) | Black aerosol acrylic, 18-20 µm film, -40°C to +140°C, RoHS compliant; conceals components on the PCBA surface. | 500 ml aerosol |
| Water Base Conformal Coating (Aquacoat CONW-54) | VOC-free, water-based moisture-proof coating; no corrosion observed after 72 hours of ASTM B117 salt spray testing. | Contact us for pack sizes |
| Coating For Electronic / Electrical Parts (ELCOAT EL-30) | Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable. | 500 ml aerosol; 1 and 25 litre |
| PCB Cleaners (Elclean Liquid) | Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue. | Contact us for pack sizes |
| PCB Cleaners (ELCLEAN E-Clean) | Fast-drying universal PCB cleaner and degreaser, free of CFC and HFC. | 500 ml aerosol; 1, 5 and 25 litre |
| External Dispensing Spray Pump | 5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100. | Equipment |
Industries We Serve in Mexico
Automotive Electronics
Control units, sensors, lighting and EV electronics for vehicle makers in the Bajío and northern states.
EMS & Contract Manufacturing
High-volume PCB assembly for North American brands in Jalisco, Baja California and Chihuahua.
Home Appliances
Controller boards for appliances made in Nuevo León, Querétaro and Guanajuato.
Medical Devices
Medical electronics assembled in Baja California for export.
LED & Power Electronics
LED drivers, power supplies and chargers.
How to Apply Acrylcoat Conformal Coating
- Clean the boardRemove flux, oil and dust with Elclean Liquid or ELCLEAN E-Clean.
- Pre-heatWarm the PCB to about 45–50°C in an oven or with a hot-air blower to drive off moisture.
- ApplySpray evenly from about 25 cm, or brush or dip. For volume work use our spray pump.
- Dry & cureAR grades are touch dry in about 10–15 minutes; ALQ-60, ALQ-100 and SKR-70 are oven cured at 80°C.
- InspectCheck coverage under a UV lamp on grades with a UV tracer before testing.
Exact drying and curing times depend on the grade and film thickness. See each product page or the technical data sheet for details.
Standards & Certifications
- Acrylcoat approved by C-DOT
- Conforms to MIL Standard MIL-I-46058C Type AR
- Complies with the European Union RoHS Directive
- Products have passed toxicity tests
- ISO 9001:2015 and ISO 14001:2015 certified
- In-house R&D and quality control laboratory
Shipping to Mexico
We ship to Mexico by air freight to Mexico City, Guadalajara or Monterrey, or by sea freight from Nhava Sheva (JNPT) to Manzanillo. Flammable coatings and aerosols are packed and documented as dangerous goods, with MSDS.
With over 25 years of experience in conformal coatings, we make every batch at our own plant and test it before dispatch, so customers in Mexico get consistent quality on every order.
Regions & Cities We Supply in Mexico
PCB Conformal Coating in Mexico: FAQs
Who supplies PCB conformal coating in Mexico?
CONINS PUNE manufactures Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps in Pune, India, and supplies them to customers in Mexico. Acrylcoat is approved by C-DOT, conforms to MIL-I-46058C Type AR and complies with the EU RoHS Directive.
What is PCB conformal coating and why is it needed?
A conformal coating is a thin protective film applied over a printed circuit board assembly. It follows the shape of the board and components and protects them against moisture, dust, fungus, oxidation and corrosion, and against high-voltage arcing and corona shorts. This reduces field failures and extends product life.
Can you supply conformal coating for automotive electronics in Mexico?
Yes. Acrylcoat SKR-70 is formulated for automotive electronics that need a thicker coating. It is applied by dispenser or brush and oven cured at 80°C for 60 minutes.
Do you supply spray equipment for production lines?
Yes. Our External Dispensing Spray Pump uses a 5 litre pressure pot and spray gun to coat batches of PCB assemblies with ALQ-30, ALQ-60 or ALQ-100.
What packing sizes are available?
Acrylcoat AR-30, ALQ-30, ALQ-60 and ALQ-100 are available in 500 ml aerosol cans and in 1, 5 and 25 litre lacquer containers. AR-60 and ARB-30 Black come in 500 ml aerosols, and SKR-70 in 1, 5 and 25 litre packs. MSDS and technical data sheets are provided on request.
How do I get a quotation for conformal coating in Mexico?
Send your product requirement, board type, coating method and quantity through our enquiry form, call +91 95455 91323, or message us on WhatsApp. We will reply with a technical recommendation and quotation for delivery to Mexico.
Need PCB Conformal Coating in Mexico?
Share your board type, coating method and quantity. Our team will recommend the right Acrylcoat grade and send a quotation for delivery to Mexico.
Leave a Review !