View Catalogue
Conformal Coating for Canada's Electronics Manufacturers
Canada's electronics manufacturing is centred in Ontario (Toronto, Ottawa and the Kitchener-Waterloo corridor) and Quebec (Montreal), with automotive electronics in southern Ontario, aerospace in Montreal, and telecom, power and industrial electronics across both provinces and British Columbia.
CONINS PUNE supplies Acrylcoat PCB conformal coatings, PCB cleaners and spray equipment to Canadian manufacturers. Acrylcoat conforms to MIL-I-46058C Type AR, and our coatings are made at our own ISO 9001:2015 certified plant in Pune, India.
- C-DOT Approved
- MIL-I-46058C Type AR
- RoHS Compliant
- ISO 9001:2015 & ISO 14001:2015
- 25+ Years of Experience
- Supplied to
- Canada
- Made at
- Our own plant in Pune, Maharashtra, India
- Delivery
- Export by air & sea freight
- Packing
- 500 ml aerosol · 1, 5 & 25 litre containers
- Documents
- MSDS & technical data sheets on request
Why PCBs in Canada Need Conformal Coating
Canadian electronics face severe cold, snow and large temperature swings. When equipment moves between cold outdoor air and heated buildings, condensation forms on circuit boards. Road salt is another threat to automotive and outdoor electronics. A conformal coating rated for low temperatures, such as Acrylcoat AR-60 (-40°C to +140°C), protects boards from condensation and corrosion.
What Acrylcoat protects against
- Moisture, humidity and condensation
- Oxidation and corrosion of component leads
- Fungus growth in humid conditions
- Dust and contamination between conductors
- High-voltage arcing and corona shorts
Recommended Conformal Coatings for Canada
Based on the industries and conditions in Canada, these are the grades customers most often choose. Our technical team will confirm the right grade for your board and process.
Acrylcoat AR-60
Why for Canada: Film rated from -40°C to +140°C.
Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable.
View product details →
Acrylcoat SKR-70
Why for Canada: Thick-film protection for automotive electronics.
Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes.
View product details →
Acrylcoat AR-30
Why for Canada: MIL-I-46058C Type AR acrylic for general boards.
Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR.
View product details →Complete Product Range Available in Canada
| Product | Key features | Packing |
|---|---|---|
| PCB Conformal Coating (Acrylcoat AR-30) | Clear acrylic coating, 20-22 µm film, 30 kV/mm dielectric strength, UV tracer. C-DOT approved, conforms to MIL-I-46058C Type AR. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat AR-60) | Thicker 40-45 µm acrylic film rated -40°C to +140°C, RoHS compliant, passes UL94 V-1 flame test, UV traceable. | 500 ml aerosol |
| PCB Conformal Coating (Acrylcoat ALQ-30) | Fast-drying acrylic lacquer for spray, brush or dip coating of PCB assemblies; solderable for easy rework. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-60) | High-build acrylic for severe working conditions, oven cured at 80°C; 25 kV/mm, CTI 600, self-extinguishing film. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| PCB Conformal Coating (Acrylcoat ALQ-100) | Our thickest ALQ grade for boards exposed to high humidity, moisture and fungus over long service life. | 500 ml aerosol; 1, 5 and 25 litre lacquer |
| Coating For LED Lighting (Acrylcoat LED-LGT-SPL-60) | Clear coating for LED drivers and LED boards; light intensity remains the same after coating. | 1, 5 and 25 litre |
| Coating For Automobile Electronics (Acrylcoat SKR-70) | Thick-film acrylic for automotive electronics, applied by dispenser or brush and oven cured at 80°C for 60 minutes. | 1 litre, 5 litre and 25 litre |
| Conformal Coating For G1, G2 & G3 Compliances | Coatings for mild (G1), moderate (G2) and severe (G3) environments with humidity, corrosive gases and contaminants. | Contact us for pack sizes |
| Opaque (Black) Conformal Coating | Deep black finish that hides circuit layout from copying or reverse engineering; MIL-I-46058C Type AR, C-DOT approved. | Contact us for pack sizes |
| PCB Conformal Coating (Acrylcoat ARB-30 Black) | Black aerosol acrylic, 18-20 µm film, -40°C to +140°C, RoHS compliant; conceals components on the PCBA surface. | 500 ml aerosol |
| Water Base Conformal Coating (Aquacoat CONW-54) | VOC-free, water-based moisture-proof coating; no corrosion observed after 72 hours of ASTM B117 salt spray testing. | Contact us for pack sizes |
| Coating For Electronic / Electrical Parts (ELCOAT EL-30) | Non-acrylic clear coating with 60 kV/mm dielectric strength for electronic and electrical parts; solderable. | 500 ml aerosol; 1 and 25 litre |
| PCB Cleaners (Elclean Liquid) | Removes flux residue, oil and ionic contamination before coating; safe on most plastics, leaves no residue. | Contact us for pack sizes |
| PCB Cleaners (ELCLEAN E-Clean) | Fast-drying universal PCB cleaner and degreaser, free of CFC and HFC. | 500 ml aerosol; 1, 5 and 25 litre |
| External Dispensing Spray Pump | 5 litre pressure pot with spray gun for coating PCB assemblies in bulk with ALQ-30, ALQ-60 and ALQ-100. | Equipment |
Industries We Serve in Canada
Automotive Electronics
Control and EV electronics for vehicle and parts makers in southern Ontario.
Aerospace
Avionics and aircraft electronics around Montreal.
Telecom & Networking
Outdoor telecom and network equipment exposed to cold and moisture.
Power, Utility & Smart Meters
Meters, relays and grid electronics installed outdoors.
Industrial & Mining Electronics
Controls and sensors used in mines and remote installations.
How to Apply Acrylcoat Conformal Coating
- Clean the boardRemove flux, oil and dust with Elclean Liquid or ELCLEAN E-Clean.
- Pre-heatWarm the PCB to about 45–50°C in an oven or with a hot-air blower to drive off moisture.
- ApplySpray evenly from about 25 cm, or brush or dip. For volume work use our spray pump.
- Dry & cureAR grades are touch dry in about 10–15 minutes; ALQ-60, ALQ-100 and SKR-70 are oven cured at 80°C.
- InspectCheck coverage under a UV lamp on grades with a UV tracer before testing.
Exact drying and curing times depend on the grade and film thickness. See each product page or the technical data sheet for details.
Standards & Certifications
- Acrylcoat approved by C-DOT
- Conforms to MIL Standard MIL-I-46058C Type AR
- Complies with the European Union RoHS Directive
- Products have passed toxicity tests
- ISO 9001:2015 and ISO 14001:2015 certified
- In-house R&D and quality control laboratory
Shipping to Canada
Shipments to Canada go by air freight to Toronto or Montreal, or by sea freight from Nhava Sheva (JNPT) to Vancouver or Montreal. Coatings and aerosols are packed and documented as dangerous goods, with MSDS.
With over 25 years of experience in conformal coatings, we make every batch at our own plant and test it before dispatch, so customers in Canada get consistent quality on every order.
Regions & Cities We Supply in Canada
PCB Conformal Coating in Canada: FAQs
Who supplies PCB conformal coating in Canada?
CONINS PUNE manufactures Acrylcoat PCB conformal coatings, Elclean PCB cleaners and external dispensing spray pumps in Pune, India, and supplies them to customers in Canada. Acrylcoat is approved by C-DOT, conforms to MIL-I-46058C Type AR and complies with the EU RoHS Directive.
What is PCB conformal coating and why is it needed?
A conformal coating is a thin protective film applied over a printed circuit board assembly. It follows the shape of the board and components and protects them against moisture, dust, fungus, oxidation and corrosion, and against high-voltage arcing and corona shorts. This reduces field failures and extends product life.
Will Acrylcoat work in Canadian winters?
Acrylcoat AR-60 and ARB-30 Black are rated for -40°C to +140°C film temperatures, and AR-30 for -50°C to +130°C, which covers outdoor use in Canadian winters.
Do you ship conformal coating to Canada?
Yes. We export from Pune, India by air or sea freight. Share your quantity and delivery city and we will confirm the shipping mode.
What packing sizes are available?
Acrylcoat AR-30, ALQ-30, ALQ-60 and ALQ-100 are available in 500 ml aerosol cans and in 1, 5 and 25 litre lacquer containers. AR-60 and ARB-30 Black come in 500 ml aerosols, and SKR-70 in 1, 5 and 25 litre packs. MSDS and technical data sheets are provided on request.
How do I get a quotation for conformal coating in Canada?
Send your product requirement, board type, coating method and quantity through our enquiry form, call +91 95455 91323, or message us on WhatsApp. We will reply with a technical recommendation and quotation for delivery to Canada.
Need PCB Conformal Coating in Canada?
Share your board type, coating method and quantity. Our team will recommend the right Acrylcoat grade and send a quotation for delivery to Canada.
Leave a Review !